Devices – Leprecon LP-3000 Series User Manual
Page 161
Advertising
LP-3000 Users Manual
Appendix C:
Creating and Editing Moving Light
Devices
Devices
Devices that are not included in the LP-3000 library can be added at any time. You
will need information from the manufacturer that specifies the DMX channel
assignments for the attributes of the devices.
To Create a New Conventional Device
1.
From the Main screen, click Setup, DMX Lines and then Device List.
The LP-3000 displays the Device List screen.
2.
If necessary, click Switch to HTP.
Conventional lights are referred to as “Highest Takes Precedence” devices
or “HTP”.
The LP-3000 displays a list of the default HTP instruments that have been
loaded into the show.
3.
Click Create Device.
The LP-3000 displays the Create Device screen.
Advertising