Leprecon LP-3000 Series User Manual
Page 42
38
Chapter Three
System Tools
LP-3000 Users Manual
The LP-3000 displays the Dimmer Patch screen.
2.
Click Select Patch.
The LP-3000 displays the Select Patch screen.
3.
Use the Modify edgewheel to scroll through the list of patches.
4.
Click Select to load the patch.
Once a patch is selected, it is immediately applied to the LP-3000 DMX outputs.
To Create a New Patch
Use the Create button to build a new patch table.
1.
From the Main screen, click Setup and then Dimmer Patch.
The LP-3000 displays the Dimmer Patch screen.
2.
Click Select Patch.
The LP-3000 displays the Select Patch screen.
3.
Click Create.
The LP-3000 displays the New Patch dialog box.
4.
Enter a name for the patch or accept the default name and click OK.
Default names follow the pattern PATCH_001, PATCH_002 and so forth.
The LP-3000 loads the new patch.