Leprecon LP-3000 Series - Manual (Page 163)

Creating and Editing Moving Light Instruments Appendix C 159
LP-3000 Users Manual
4. Enter information into the first four fields on the screen.
Use the Select edgewheel to move from field to field.
Name: Enter a name for the device. This name will appear in the
Programming screen and Instrument lists.
Manufacturer: Enter the name of the device’s manufacturer.
DMX Mode: This is an informational field in which you can enter data about
the DMX mode of the device.
Length: The number of channels that the device requires.
5. After entering a number in the Length field and moving to a new field, the
LP-3000 displays a warning dialog box to confirm the addition of the new
attributes.
Note that the LP-3000 will always ask you to confirm creating one attribute
fewer than the number you entered in the Length field. This is because an
undefined attribute is automatically created when you first open the Create
Device screen.