Leprecon LP-3000 Series - Manual (Page 166)

162 Appendix C Creating and Editing Moving Light Instruments
LP-3000 Users Manual
10. Adjust any Min and Max DMX values that do not match the defaults.
The default minimum value is 0. The default maximum value is 255. These
values are usually correct. One exception is the case where an instrument
has split attributes—two attributes assigned to the same channel.
11. Adjust any Default values that are incorrect.
This is the value that is selected by default for cue programming.
12. For any attributes that you created or divided, assign the correct Grouping.
The attribute names that appear in the Name list are automatically assigned
to the correct grouping.
You will only need to assign the grouping to the ones you have added.
Pan and tilt are always Focus attributes. Dimmer is always an Intensity
attribute. Color and color mix are Color attributes. Most others—such as
gobo, iris and shutter—are Beam attributes.
13. If you want to add your own comments about the fixture, move to the Info
field and enter your comments.
14. If you want to add attribute labels to the instrument, please go directly to the
procedure To Add Attribute Labels to an Instrument beginning on page
163.
15. When the instrument definition is complete, click Save to store the
instrument in the library.
NOTE: If you want to use the instrument in your show, add it to the show by
following the procedure To Install a Moving Light Fixture into the System
beginning on page 31.