Leprecon LP-3000 Series User Manual
Page 62
58
Chapter Five
Chases
LP-3000 Users Manual
2.
Move the key switch to the Unlock position.
3.
Set the Page roller to the desired page.
4.
Press the Record button, located to the right of the key switch.
5.
Set the first step.
Use the manual scene faders or preset scene faders to set the level for the
chase step.
6.
Save the first step.
Press the Solo button of a playback to save the look as the first step of the
chase.
CAUTION: Pressing Solo erases all steps of any chase previously recorded
on that playback.
7.
Add more steps.
Use the faders to set the next chase step. Press the Add button of the
playback to save it. The Chase screen display will verify that the step has
been saved.
Continue adding steps in this manner until the chase is complete.
8.
Press the Run button on the Master panel of the LP-3000 to end recording.
To Play Back a Chase
1.
From the Main screen, click Chase.