Leprecon LP-3000 Series - Manual (Page 79)

Cue Stacks Chapter Six 75
LP-3000 Users Manual
2. Using the Stack edgewheel, select a stack to play back.
3. Click Activate.
The LP-3000 loads the stack.
The area in the center of the screen contains the playback list, which shows
Now (the current scene on stage) as well as the next three cues to be
executed.
For each cue, the fade times are shown. If automatic sequence cues have
been built, a countdown value will be displayed in the Follow Time field.
These cues will automatically execute without pressing the Go button after
the wait time has elapsed. Please note that the follow time is expressed as
the time from the beginning of the current cue fade to the beginning of the
following cue. This allows fade times to be altered without requiring the
follow time to be adjusted.
In the upper left corner of the playback list are two gauges that display the
status of fades that are in progress. The gauges also have a percentage
field above them to indicate fade completion.
Below the gauges are the images of the display panel Back, Hold and Go
buttons. You can use the display panel buttons or click with the mouse on
the screen images with the same result.
4. Press Go to start the fade from now to next at the defined fade rates.
5. Press Hold to freeze the fade at its current status.