Leprecon LP-3000 Series - Manual (Page 128)

124 Chapter Twelve Creating New Labels
LP-3000 Users Manual
To Create a Focus Label
New focus positions for instruments connected to the LP-3000 are a snap to create.
As mentioned, editing focus labels is an easy way to accommodate changes in the
stage setup or position of the instruments.
Before setting a new focus position, you will want to set the instruments to a clearly
visible pattern and a high intensity value in the programming screen. Open beam
presets are available for the instruments that include gobo and iris attributes.
Remember that you can select Invert Pan and Invert Tilt when creating or
modifying DMX line assignment. Enabling or disabling these options may make it
easier to create focus labels. For more information, please see To Install a Moving
Light Fixture into the System beginning on page 31.
1. From the Main screen, click ML Program.
The LP-3000 displays the Programmer screen.
2. Under Instruments Selected, select the instrument or instruments for which
you want to create new focus labels.
3. Click Focus.
The appearance of the Programmer screen changes.
4. Click Add.
The LP-3000 displays the ML Focus screen.
By default, the focus is set to the default value for the instrument and the
pan and tilt are set to the center.