Leprecon LP-3000 Series - Manual (Page 29)

LP-3000 Show Basics Chapter Two 25
LP-3000 Users Manual
You can format a disk from the LP-3000. You can also erase all the files that are on
a disk. Note that there is no way to selectively erase floppy disk files from the LP-
3000. If you want to do so, use a personal computer.
1. From the Main screen, click Setup and then Show.
The LP-3000 displays the Show screen.
2. Insert a floppy disk into the disk drive.
3. Click Format Floppy.
The LP-3000 displays the Format dialog box.
4. Do one or more of the following:
To Do
Display a summary of
formatting results. Under Other options, select Display
summary when finished.
Erase a floppy disk. Under Format type, select Quick (erase).
Click Start.
Format a floppy disk. Under Format type, select Full. Click
Start.
5. When disk formatting is complete, click Close.
NOTE: It is not possible to accidentally format the internal hard drive of the LP-
3000
.