7 technical data, Safety engineering – Lenze 8400 User Manual
Page 279
Advertising
Safety engineering
Technical data
10
279
EDS84ASC552 EN 9.1
10.7
Technical data
Supply
The inputs and outputs are isolated and designed for a low-voltage supply through a safely
separated power supply unit (SELV/PELV) of 24 V DC. P/N switching input signals and test
pulses 1 ms are permissible.
Active sensors are directly wired to the X80 terminal strip.
Passive sensors are wired to the X80 terminal strip via a switching device. The switching
device must comply with the required control category of the application.
There is no monitoring for short circuits.
Advertising
This manual is related to the following products: