1 parameter setting, Parameter setting, 6i/o terminals – Lenze 8400 User Manual
Page 333
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
333
6
I/O terminals
6.3
Touch probe detection
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.3.1
Parameter setting
Proceed as follows to open the parameterisation dialog for setting a TP signal source:
1. Go to the Terminal Assignment tab and select "Digital terminals TouchProbe" in the Control
connections list field:
2. Click the
button for the digital input that is to be set for the touch probe detection.
Tip!
If the "Table positioning" technology application is used, the following parameterisation
dialog can be opened for the selected TP signal source in the parameterisation dialogs for
the
and the basic "
" function via the Set up touch probe... button: