4 basic settings, 1 machine parameters, Basic settings – Lenze 8400 User Manual
Page 466: Machine parameters, Rrectly, 8basic drive functions (mck)
8
Basic drive functions (MCK)
8.4
Basic settings
466
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
8.4
Basic settings
8.4.1
Machine parameters
The motor end, among other things, is described by the machine parameters indicated below in
respect of the mechanics used.
, you can set the machine parameters in the »Engineer» on the tab headed
Application Parameters on the dialog level Overview Machine parameters:
Tip!
You are provided with more detailed information on the machine parameters "
" and "
" in the following subchapters.
Note!
Setting the machine parameters is a basic prerequisite for the operating modes
"
" and "
The more precisely the machine parameters are set, the better the results of positioning!