3 parameterising the motor control, Parameterising the motor control, 3commissioning – Lenze 8400 User Manual
Page 82
3
Commissioning
3.9
Commissioning of the "Switch-off positioning" technology application
82
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.9.3
Parameterising the motor control
1. Select the Application parameters tab from the Workspace.
• The motor control parameters, among other things, can be found on the left:
2. In the Motor control list field (
), select the desired motor control.
3. Adapt the motor control parameters:
Related topics:
Parameter
Lenze setting
Info
Value Unit
V/f base frequency
(
)
50.0 Hz
Adapting the V/f base frequency ( 155)
Imax in motor mode
(
)
47.00 A
Optimising the Imax controller ( 158)
Vmin boost
(
)
1.60 %
Adapting the Vmin boost ( 157)