3commissioning – Lenze 8400 User Manual
Page 54
3
Commissioning
3.6
Commissioning wizard 8400
54
Lenze · 8400 protec HighLine · Reference manual · DMS 3.0 EN · 03/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
How to carry out a guided commissioning using the »Engineer«:
1. In the Project view, select the 8400 protec HighLine controller.
2.
Go online.
• After a connection to the controller has been established, the following status is
displayed in the Status line:
3. Click the
icon to open the commissioning wizard 8400 dialog box.
• Now the commissioning wizard guides you step by step through the setting of the
important parameters for a quick commissioning.
• The Next button can only be activated again after all parameter settings in the device
have been reset via the Load Lenze setting button.
Related topics:
Commissioning of the "Actuating drive speed" technology application