Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1253)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1237
Designa-
tion Description
.FIN Command status; 1 = Command has ended at least
once, 0, invalid (variable not available) = Command has
never ended
Result variables
The following result variables are defined in the CALC command and can
be used in formulas under the designation 'RS.ResultName.Variable
designation':
Designa-
tion Description
.VAL Result value, optional, i.e. 'RS.RS01' = 'RS.RS01.VAL'
.ASD Absolute standard deviation for the result
.MAX Maximum value of the result
.MIN Minimum value of the result
.MNV Mean value of the result
.NSR Statistics actual counter for the result
.NST Statistics setpoint counter for the result
.OVF Limit value violation for result; 1 = limit exceeded, 0 =
limit not exceeded
.RSD Relative standard deviation for the result
.STS Statistics status for the result; 1 = Statistics on, 0 =
Statistics off
.UNI Result unit (Text)
.SLO Slope for the linear regression (result vs. sample size)
.ITC Axis intercept for the linear regression (result vs. sample
size)
.COR Correlation coefficient for the linear regression (result vs.
sample size)
5.6.8.2.2 CALC - Calculation overview
Dialog window: Method ▶ CALC ▶ Properties... ▶ CALC 'Command name'
Command name
Name of the command.
Input 25 characters