Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1588)

7.14 874 Oven Sample Processor ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1572 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
This button is only displayed with devices that have their own firmware. It
is only active if the device has an old program version not supported by
tiamo and which can be updated by tiamo itself.
Device serial number
Shows the serial number of the device.
Set to work
Shows the date on which the device was automatically added to the
device table.
Data storage under legal control
Indicates whether the balance has its own data storage under legal con-
trol.
Only visible and editable with Sartorius balances
Selection
on | off
Default value off
Remarks
Remarks about the device.
Input 1000 characters
Default value empty
7.14.3 Properties - Tower
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Tower
On the tab Tower the tower parameters for the tower on the 874 Oven
Sample Processor are edited.
Max. stroke path
Entry of the lowest permitted lift position for the tower. A lift height of 0
mm corresponds to the "Home position", i.e. the lift is moved right to the
top.
Range 0 ... 110 mm
Default value 110 mm
Lift rate
Entry of the lift rate for manual control of the tower.
Range 3 ... 25 mm/s
Default value 25 mm/s