Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1419)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1403
Upper limit
Upper warning limit.
Input 10 digits
Default value 1.0250
Intervention limits for titer
on | off (Default value: off)
If this option is activated, then the titer value will be shown in red if
these limits are exceeded.
Lower limit
Lower intervention limit.
Input 10 digits
Default value 0.9500
Upper limit
Upper intervention limit.
Input 10 digits
Default value 1.0500
6.6.3.6 Properties - Exchange unit
Tab: Configuration ▶ Titrants/solutions ▶ Properties ▶ Exchange unit
Hardware
Name
Freely definable designation for the exchange unit.
Input 24 characters
Default value 'empty'
Type
Display of the type of exchange unit:
Selection EU | IEU
EU
Non-intelligent exchange unit without data chip.
IEU
Intelligent 806 Exchange Unit with data chip.
Order number
Order number of exchange unit. With intelligent exchange units the order
number is read off automatically and cannot be edited.