Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1587)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1571
7.14 874 Oven Sample Processor
7.14.1 874 Oven Sample Processor - Overview
Dialog window: Configuration ▶ Devices ▶ [Edit] ▶ Properties… ▶ Properties - 'De-
vice type' - 'Device name'
The parameters for the device 874 Oven Sample Processor are set on
the following tabs:
￭ General
General device information such as device name, device type, serial
number, etc.
￭ Tower
Properties of the tower.
￭ Rack
Information on the rack attached.
￭ MSB #
Properties of the MSB connector 1...3 and the peripheral devices con-
nected to it.
￭ Oven
Information on the oven.
￭ GLP
Information on GLP tests and GLP monitoring.
7.14.2 Properties - General
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ General
On the tab General, general properties of the device are displayed.
Device name
Designation of the device (can be freely defined by user).
Input 50 characters
Default value Device type number_#
Device type
Display of the device type.
Program version
Shows the program version of the device.
Only visible with devices that have their own firmware.
[Update]
Opens the dialog window Load new program version (see Chapter
7.1.6, page 1493).