Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1413)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 6 Configuration
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1397
Concentration (unit)
Concentration unit of solution.
Input 10 characters
Selection mol/L | mmol/L | µmol/L | g/L | mg/L | µg/L |
mg/mL | ppm | % | mEq/L
Default value mol/L
Comment
Remarks about the solution (e.g. batch number.)
Input 24 characters
Production date
Date on which the solution was produced. This date can be edited for
manually added solutions only by pressing .
Selection Date selection
Monitoring the solution
on | off (Default value: off)
If this option is activated, then the working life of the solution will be
monitored.
Working life
Working life of the solution in days. If a value is entered here then the
Expiry date will be automatically adapted.
Range 0 ... 999 Days
Default value 999 Days
Expiry date
Expiry date of the solution. The date can be selected by pressing in the
dialog window Select date. After a date has been entered the Working
life will be automatically adapted.
Selection Date selection
Message
The message options can only be edited if monitoring is switched on.
Message by E-mail
on | off (Default value: off)
The message is additionally sent to the e-mail address defined under [E-
mail] if this option is activated. The message is sent in text format.