Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 26)

1.10 What is new in tiamo 2.3? ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
1.10 What is new in tiamo 2.3?
This chapter describes the differences between the new software version
tiamo 2.3 and the version tiamo 2.2.
1.10.1 New features
General
tiamo now also supports the device activation with 64-bit operating sys-
tems and is thus completely 64-bit-capable.
New instruments
￭ 089 Photometer
New instrument firmware
￭ 5.089.0010
￭ 5.814.0024
￭ 5.815.0025
￭ 5.846.0021
￭ 5.855.0013
￭ 5.856.0021
￭ 5.857.0021
￭ 5.867.0021
￭ 5.874.0011
￭ 5.888.0021
￭ 5.890.0021
￭ 5.901.0021
￭ 5.902.0021
￭ 5.904.0021
￭ 5.905.0021
￭ 5.906.0021
￭ 5.907.0021
New or updated commands
￭ MET Cond: Command for monotonic equivalence point titrations with
conductometric measurement.
￭ MEAS TMF: Command for the determination of the transmission fac-
tor of a measurement configuration.
￭ MEAS Opt: Command for extinction measurements (new for the 089
Photometer).
￭ MEAS Opt Conc: Command for concentration measurements (direct
measurement) with spectrometer or photometer.
￭ CAL LOOP Opt: Loop command for the calibration of colorimetric
sensors, used together with the command CAL MEAS Opt.