Metrohm tiamo 2.3 Patch 1 (process analysis) User Manual
Page 410
4.8 Subwindow Curves
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
394
￭￭￭￭￭￭￭￭
tiamo 2.3 Patch 1 (for Process Analysis)
For MEAS TC Cond commands
Selection
Temperature [°C] | Measured value | Time [s] |
dMW/dt | Calculated 1...3 | External 1...3 | off
Default value
off
For MEAS Ref commands
Selection
Wavelength [nm] | Intensity [Counts] | Inten-
sity Dark [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value
off
For MEAS TMF commands
Selection
Time [s] | Transmission [%] | Absorbance
[mAU] | d
ε/dt [mAU/min] | Temperature [°C] |
off
Default value
off
For MEAS Spec commands
Selection
Wavelength [nm] | Absorbance [mAU] | Inten-
sity [Counts] | Intensity Dark [Counts] | Inten-
sity Ref [Counts] | Transmission [%] | Satura-
ted pixels | off
Default value
off
For MEAS Opt commands
Selection
Time [s] | Measured value | Intensity [Counts] |
Transmission [%] | Saturated pixels | Tempera-
ture [°C] | d
ε/dt [mAU/min] | Calculated 1...3 |
External 1...3 | off
Default value
off
For CAL Spec-commands
Selection
Wavelength [nm] | Intensity [Counts] | Satura-
ted pixels | off
Default value
off
Label
Freely definable axis label for the y1 axis. With auto the designation from
the field Size will be used.
Selection
50 characters | auto
Default value
auto