Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 360)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
344 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
PDF file
on | off (Default value: off)
If this check box is activated the reports are put out as PDF files under the
entered file name.
Note
If several reports are produced simultaneously as a PDF file then an
index will be automatically appended to the file name.
4.5.2.13 Determinations - Show method
Menu item: Database ▶ Determinations ▶ Show method…
The menu item Determinations ▶ Display method... or the symbol
opens the dialog window Determination method 'Method name' in
which the method used for the selected determination is shown with its
tracks and commands.
Show command properties
With a double-click on a command or the context-sensitive menu item
Properties the properties window of the corresponding command opens
in which the parameters are shown.
Zoom
The standard presentation of the determination method shows all the
tracks completely. The following zoom levels for the display of the method
can be selected with the context-sensitive menu item Zoom:
Selection 200 % | 150 % | 100 % | 75 % | 50 % | 25 % |
Fit to width | Fit to height | Fit in window
Default value Fit in window
Fit to width
Adjust to width of the window.
Fit to height
Adjust to height of the window.
Fit in window
Adjust to both height and width of the window.
Saving method
[Save as...]
With this button the determination method can be saved in a method
group. The window Save method opens in which the method group can
be selected and a method name entered or selected.