Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 915)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 899
Pause 2
Pause 2
Waiting time, e.g. for the electrode to settle down after the start or a
reaction time after the addition of the start volume. The pause follows at
the end of all the start conditions.
Range 0 ... 999999 s
Default value 0 s
5.6.3.8.7.4 STAT U - Control parameters
Tab: Method ▶ STAT U ▶ Properties... ▶ Control parameters
Command name
Name of the command.
Input 25 characters
Control point
Control point at
Definition of the current value to be controlled.
Titrando, 855
Range
-2000.0 ... 2000.0 mV
Selection off
Default value off
Titrino
Range
-2000 ... 2000 mV
Selection off
Default value off
Titration rate
Titration rate
Three predefined rates, for which the parameters for Control are not dis-
played, can selected for the titration rate. The User setting must be selec-
ted in order to be able to edit these parameters.
Selection 50 µL/min | 100 µL/min | 500 µL/min | User
Default value 100 µL/min