Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1635)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 7 Instruments
tiamo 2.3 Patch 1 (for Process Analysis) ￭￭￭￭￭￭￭￭ 1619
High level (100%)
Display of the highest analog output value with unit.
0% Mapping
Measured value to be used when the Low level (0%) is applied as out-
put value, with unit.
100% Mapping
Measured value to be used when the High level (100%) is applied as
output value, with unit.
Default value
Display of the default value the outputs takes directly after starting and
exiting the program. The default value is also set after an error or when
canceling the method.
[Edit]
Opens the dialog Properties Analog input in order to edit the selected
port.
[Port description]
Opens a menu in order to import or export port descriptions.
The menu [Port description] contains the following menu items:
Import Import of a text file (TXT, CSV) containing the port description. Each line is inter-
preted as port description, spaces will be ignored.
Export Export a text file containing the port descriptions of all digital inputs.
7.20.7.1 Properties Analog output
Dialogfenster Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'De-
vice type' - 'Device name' ▶ Analog outputs ▶ [Edit] ▶ Properties Analog output
In the dialog window Properties Analog output the properties for the
individual analog outputs are set.
Port
Display of the internal designation for an analog output port of the type
AnOut_x_y_z, where x stands for the controller; y for the analog output
terminal and z for the output on this terminal.
Port description
Freely selectable designation for an analog output port. This designation is
used in the program to actuate the port.