Metrohm tiamo 2.3 Patch 1 (process analysis) - Manual (Page 1718)

9.1 Audit Trail ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1702 ￭￭￭￭￭￭￭￭ tiamo 2.3 Patch 1 (for Process Analysis)
After this function has been selected, the field in which the cursor is
located will have a yellow background when navigating in the Audit
Trail table.
2 Double click on the desired field with the left-hand mouse key.
The contents of the field selected in the table will be set as a filter
condition and this filter will be applied directly to the table.
Note
The quick filter can be used again within the filtered table, so that
the number of entries can be limited step by step.
Defining and using special filter
1 Click on the symbol or menu item Filter ▶ Special filter.
The dialog window Special filter opens for defining user-specific fil-
ters.
2 Use the Edit ▶ Edit line menu to open the dialog window Edit fil-
ter criterion New filter.
3 Enter the filter criteria and confirm with OK.
4 In the Special filter dialog window, click on [Apply filter].
The table will be filtered.
Using special filter
1 In the Special filter dialog window, select the desired special filter
from the list box Filter.
The table will be filtered.
9.1.3 Exporting Audit Trail
How to proceed?
1 Select program part Configuration.
2 Click on the symbol or the menu item Tools ▶ Audit Trail….