NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 107)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Switching User Manual 107
If you assign a port to a protocol-based VLAN for a specific protocol, untagged frames
received on that port for that protocol are assigned the protocol-based VLAN ID. Untagged
frames received on the port for other protocols are assigned the port VLAN ID, either the
default PVID (1) or a PVID you specifically assigned to the port using the Port VLAN
Configuration page.
You define a protocol-based VLAN by creating a group. Each group forms a one-to-one
relationship with a VLAN ID, can include one to three protocol definitions, and can include
multiple ports. When you create a group, you specify a group ID.
To configure a protocol-based VLAN group:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Switching  > VLAN > Advanced > Protocol Based VLAN Group Configuration .
The Protocol Based VLAN Group Configuration page displays. The page also shows the
Protocol Based VLAN Mapping section.
6. In the Group ID field, specify a group ID that allows you to identify the group.
7. In the Protocol field, enter one or more protocols that must be associated with the group.
You can enter the ARP, IP, and IPX keywords. Separate keywords with a comma. Although
you cannot enter other keywords, you can enter hexadecimal or decimal values in the
range of 0x0600 (1536) to 0xFFFF (65535).
8. Click the Add button.
The protocol-based VLAN group is added to the switch.
9. Click the Apply button.
Your settings are saved.