NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 267)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 267
The default password is password .
The System Information page displays.
5. Select Security > ACL > Basic > MAC ACL .
The MAC ACL page displays.
6. Select check box for the rule.
7. In the Name field, specify the new name.
8. Click the Apply button.
Your settings are saved.
Delete a MAC ACL
To delete a MAC ACL:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > ACL > Basic > MAC ACL .
The MAC ACL page displays.
6. Select check box for the rule.
7. Click the Delete button.
The rule is removed.
Configure MAC ACL Rules
Use the MAC Rules page to define rules for MAC-based ACLs. The access list definition
includes rules that specify whether traffic matching the criteria is forwarded normally or
discarded. A default
deny all rule is the last rule of every list.