NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 171)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure Routing User Manual 171
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Routing  > ARP > Advanced > Global ARP Configuration .
The Global ARP Configuration page displays.
6. In the Age Time (secs) field, enter the time, in seconds, that a dynamic ARP entry remains
in the ARP table before aging out.
The range is 15 to 21600 seconds. The default value is 1200 seconds.
7. Click the Apply button.
Your settings are saved.
Remove an ARP Entry From the ARP Cache
You can remove all or specific entries from the ARP table.
To remove entries from the ARP table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Routing  > ARP > Advanced > ARP Entry Management .
The ARP Entry Management page displays.
6. From the Remove From Table menu, select the type of ARP entry to be deleted:
• All Dynamic Entries
• All Static Entries
• All Entries