NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 225)

Smart Managed Pro Switches MS510TX and MS510TXPP
Manage Device Security User Manual 225
The server is added to the switch.
Modify the Settings for a RADIUS Accounting Server on the Switch
To modify the settings for a RADIUS accounting server on the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > Management Security > RADIUS > Accounting Server Configuration .
The Accounting Server Configuration page displays.
6. Modify the configuration for the selected accounting server.
7. Click the Apply button.
Your settings are saved.
Remove a RADIUS Accounting Server From the Switch
To a remove a RADIUS accounting server from the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select Security > Management Security > RADIUS > Accounting Server Configuration .
The Accounting Server Configuration page displays.