NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 70)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information User Manual 70
LLDP-MED Network Policy
This page displays information about the LLPD-MED network policy TLV transmitted in the
LLDP frames on the selected local interface.
To view LLDP-MED network policy information for an interface:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select System > LLDP > Advanced > LLDP-MED Network Policy .
The LLDP-MED Network Policy page displays.
6. From the Interface menu, select the interface for which you want to view the information.
Note: The menu includes only the interfaces on which LLDP is enabled. If no
interfaces are enabled for LLDP, the
Interface menu does not display.
The page refreshes and displays the data transmitted in the network policy TLVs for the
interface.
The following table describes the LLDP-MED network policy information that displays on the
page.
Table 18. LLDP-MED network policy information
Field Description
Network Policy Number The policy number.
Application The media application type that is associated with the policy. Only the voice
application type is supported. The application type that is received on the
interface includes the VLAN ID, priority, DSCP, tagged bit status, and unknown
bit status. The application information is displayed only if a network policy TLV
was transmitted from the port.
VLAN ID The VLAN ID associated with the policy.
VLAN Type Indicates whether the VLAN associated with the policy is tagged or untagged.