NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual
Page 73
Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information
User Manual
73
6.
To view additional details about a port, click the port (which is a hyperlink) in the Interface
column of the Port Information table.
The following table describes the detailed local information that displays for the selected
port.
Port ID Subtype
The type of information used to identify the interface in the Port ID field.
Port ID
The port number.
Port Description
The user-defined description of the port. For information about how to
configure the port description, see
Configure the Port Settings on page
.
Advertisement
The TLV advertisement status of the port.
Field
Description
Managed Address
Address SubType
The type of address the management interface uses, such as an IPv4
address.
Address
The address used to manage the device.
Interface SubType
The port subtype.
Interface Number
The number that identifies the port.
MAC/PHY Details
Auto Negotiation Supported Indicates whether the interface supports port speed autonegotiation. The
possible values are True and False.
Auto Negotiation Enabled
The port speed autonegotiation support status. The possible values are True
(enabled) or False (disabled).
Auto Negotiation Advertised
Capabilities
The port speed autonegotiation capabilities such as 1000BASE-T half-duplex
mode or 100BASE-TX full-duplex mode.
Operational MAU Type
The Medium Attachment Unit (MAU) type. The MAU performs physical layer
functions, including digital data conversion from the Ethernet interface
collision detection and bit injection into the network.
MED Details
Capabilities Supported
The MED capabilities enabled on the port.
Current Capabilities
The TLVs advertised by the port.
Device Class
Network Connectivity indicates that the device is a network connectivity
device.
Network Policies
Application Type
The media application type associated with the policy.
VLAN ID
The VLAN ID associated with the policy.
Field
Description