NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 221

Advertising
background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Manage Device Security

User Manual

221

The login window opens.

4.

Enter the switch’s password in the

Password

field.

The default password is

password

.

The System Information page displays.

5.

Select

Security > Management Security > RADIUS > Global Configuration

.

The RADIUS Configuration page displays.

The Current Server IP Address field is blank if no servers are configured (see

Configure

a RADIUS Authentication Server on the Switch on page

222

). The switch supports up to

eight RADIUS servers. If more than one RADIUS server is configured, the current server
is the server configured as the primary server. If no servers are configured as the primary
server, the current server is the most recently added RADIUS server.

6.

In the

Max Number of Retransmits

field, specify the maximum number of times a request

packet is retransmitted to the RADIUS server.

The valid range is from 1 to 15. The default value is 3.

Consider the maximum delay time when you are configuring RADIUS maximum
retransmit and RADIUS time-out values. See the information in the introduction of this
section.

7.

In the

Timeout Duration

field, specify the time-out value, in seconds, for request

retransmissions.

The valid range is from 1 to 30. The default value is 3.

Consider the maximum delay time when you are configuring RADIUS maximum
retransmit and RADIUS time-out values. See the information in the introduction of this
section.

8.

From he

Accounting Mode

menu, select to disable or enable RADIUS accounting on the

server.

The default is Disabled.

9.

Click the

Apply

button.

Your settings are saved.

The following table describes the nonconfigurable fields displayed on the page.

Table 55. RADIUS Configuration information

Field

Description

Current Server Address

The address of the current server. This field is blank if no servers are
configured.

Number of Configuration Servers The number of configured RADIUS servers. The value can range from 0 to 8.

Advertising