NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 49)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information User Manual 49
• In the Go To Interface field, enter the port using the respective naming convention
(for example, g1 or g12), and click the Go button.
The entry corresponding to the specified interface is selected.
For more information about naming conventions, see Interface Naming Conventions
on page 13 .
• Select the port.
7. From the Auto Power Down Mode menu, select Enable or Disable .
The default is Disable, which is the global setting (see Configure the Global PoE
Settings on page 56 ). For ports g1–g4 only, you can disable the mode.
8. From the Short Cable Mode menu, select Enable or Disable .
The default is Disable, which is the global setting (see Configure the Global PoE
Settings on page 56 ). For ports g1–g4 only, you can disable the mode.
9. From the EEE Mode menu, select Enable or Disable .
The default is Disable. If the EEE mode is not supported, then N/A is displayed.
10. Click the Apply button.
Your settings are saved.
Configure Green Ethernet Settings for Local Devices
Use this page to configure and view detailed per-port green Ethernet settings for local
devices.
To configure and view green Ethernet for local devices:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select System > Management > Green Ethernet > Green Ethernet Details .
The Local Device Information page displays.
6. From the Interface menu, select the interface.