NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch - Manual (Page 60)

Smart Managed Pro Switches MS510TX and MS510TXPP
Configure System Information User Manual 60
From the System > SNMP menu, you can access pages that are described in the following
sections:
• Configure the SNMPv1/v2 Community on page 60
• Configure SNMPv1/v2 Trap Settings on page 62
• Configure SNMPv1/v2 Trap Flags on page 64
• View the Supported MIBs on page 65
• Configure SNMPv3 Users on page 65
Configure the SNMPv1/v2 Community
Only the communities that you define can access to the switch using the SNMP V1 and
SNMP V2 protocols. Only those communities with read/write level access can be used to
change the configuration using SNMP.
Add an SNMP Community:
To add an SNMP community:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the Switch on page 14 .
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password .
The System Information page displays.
5. Select System > SNMP > SNMPv1/v2 > Community Configuration .
The Community Configuration page displays.
6. In the Management Station IP field, specify the IP address of the management station.
7. In the Management Station IP Mask field, specify the subnet mask to associate with the
management station IP address.
Together, the management station IP and the management station IP mask denote a
range of IP addresses from which SNMP clients can use that community to access this
device. If either the management station IP or management station IP mask value is
0.0.0.0, access is allowed from any IP address. Otherwise, every client’s address is
ANDed with the mask, as is the management station IP address. If the values are equal,
access is allowed. For example, if the management station IP and management station IP
mask parameters are 192.168.1.0/255.255.255.0, then any client whose address is