Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 1106)

L-force | PLC Designer
Devices
1104 DMS 4.1 EN 03/2011 TD29

To do this, the arrangement of the I/O compound modules must be simulated in the
control configuration of the PLC.
Abb. 543 Example: Mapping of the physical topology in the control configuration
Configuration takes place in that the I/O compound modules are inserted as
corresponding devices under the L-force controller in IOSliceContainer:
It is important that the sequence of I/O compound modules in the device tree matches
the physical arrangement.