Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 235)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 233
12.5 Build
The command category 'Build' provides commands for handling the project file.
12.5.1 Build Commands
The commands listed below are provided with the 'Build Commands' plug-in for
command category 'Build'. If not explicitly named differently, they always refer to the
currently active application.
The "build" commands on the one hand serve to handle syntactical checks, either just
on the changed objects or on all objects of the active application. On the other hand
you can perform an offline code generation run in order to check for detected compile
errors before downloading the code to the device.
The results each get displayed in the message window, category 'Build'.
The "clean" commands serve to delete the compile information which was created at
the last download - including generation of compilation code - on the target system.
This for example will concern Online Change.
By default the commands are part of the 'Build' menu. If necessary open the Customize
dialog to view resp. modify the menu configuration. Notice category 'Build'.
Note: The currently used compiler version is defined in the Project Settings, category
Compile options.
• Build
• Rebuild
• Generate code
• Clean
• Clean all
• Generate runtime system files
• ( Check All Pool Objects )