Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 355)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 353
Settings:
Save parse trees to file: In case of large projects or low-performant systems it might be
reasonable to activate this option. It helps to avoid out-of-memory problems by
storing the precompile (language model) information of the project in a temporary file
and not in the main memory. However this will increase the project loading and
compilation time.
Replace constants: Per default this option is activated, which means: For each constant
of scalar type (thus not for strings, arrays, structures) directly its value gets loaded. In
online mode the constants are indicated by a icon preceding the value in the
declaration or watch view. In this case any accessing of constants e.g. via an ADR
operator or forcing and writing are not possible. If the option is deactivated, the
constant can be accessed, however this will mean a longer processing time.
Category Page Setup
The dialogs for configuring the layout of a printout page are provided by the 'Print
Engine' plug-in. For a description see Page Setup. The layout defined here is valid for
printouts via the 'Print...' and 'Document...' commands.
Category Source Download
Abb. 159 Project Settings dialog, category Source Download