Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 827)

L-force | PLC Designer
General Editors

DMS 4.1 EN 03/2011 TD29 825
Here you can define that on the mouse-action a dialog should be opened, which is
realized by another (default or user-designed) visualization. The selection list will offer
all visualizations which are defined in their object properties as to be used as a dialog.
So you might provide a self-designed dialog as user input mask in a visualization.
At least the default object "VisuDialogs.Login" will be available.
- Execute command (execute programs, print, recipe manager commands)
Abb. 446 Input Configuration, Execute command
Here you can define a sequence of commands to be executed on the mouse action.
From selection list Configure commands choose the desired command and use button
in order to enter the command in the table in the lower part of the dialog. This
table always contains the commands currently selected for the local input
configuration.
A short description on the command currently selected in the upper list always
appears in the center part of the dialog. Accordingly supply the parameters for the
command in the table columns 1st Parameter and 2nd Parameter. (Column command
shows the internal command name.) See also further below here on the help page the
descriptions of the particular commands.
Via button the currently selected entry can be removed from the table.