Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 646)

L-force | PLC Designer
General Editors
644 DMS 4.1 EN 03/2011 TD29

To add a element
The last row of the table is an empty row with the type Empty. When double-clicking
this entry and selecting a type of the pull down menu, a new row is appended. An
other way to get a new element is to open the context menu of the table entries. It
provides the command Insert element. This command insert a new element with the
same values of the element inserted before in the row before the selected row.
Abb. 336 Context menu of the table editor
To modify a table entry
The content of the changeable columns are displayed in a black font. Such entries can
edited by double clicking on them or by selecting it with the mouse and pressing any
key. Selected entries will be indicated by a thin blue frame. Then the in line editor or a
pull down menu opens and the desired value can inputted. Numbers are formatted in
American style. The number of the row can not be changed.
The context menu of the table entries provides the command Apply value for all
elements. This command copies the current value of the entry in all other entries or
the same column, when the value is valid.
Abb. 337 Pull down menu in the table editor
To delete a element
A selected row can be deleted with the Del key or by opening the context menu and
command Remove element.
Unsupported elements
In different to the text editor the table editor do not support the following elements
and commands: parable, IEC variables, jumps, shift coordinates, step suppression, G4
and G75.