Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 488)

L-force | PLC Designer
Menu Commands sorted by Categories
486 DMS 4.1 EN 03/2011 TD29

12.28.2 Change Source Control...
Symbol:
This command (category 'Source Control') opens the Change Source Control dialog.
Here the connection to an external database via ENI can be set up and activated.
Further on the bindings of the project objects to the database locations might be
viewed and modified.
Abb. 258 'Change Source Control' dialog
Use source control for this project (ENI): When this option is activated, the project will
be set under source control. That means that the project objects are handled in an
external data base, the communication to which is done by an ENI Server. The
connection to the ENI Server is defined in the 'Database connection' field:
Database connection:
Host: Address of the computer where the ENI Server is running; for example
"192.168.100.18", "testpc-1", "localhost".
Port: This port number must be the same as set in the configuration parameters of the
ENI Server; default: 80.
Location: Name of the data base folder where the project objects should be stored by
default.