Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 378)

L-force | PLC Designer
Menu Commands sorted by Categories
376 DMS 4.1 EN 03/2011 TD29

To install a further library in order to make further elements available, use button
Install Library.... to open the Library Repository dialog, where the installation can be
done like for any other libraries. The new library and its elements will be added to the
current list of available elements.
To install one or several elements for getting usable with the specified profile, select
it/them in the list and use button Install Element... The elements will be added to the
'Installed Elements' list (see above).
Note: Currently only one version of an element can be installed. If you try to install
two versions of the same element, an error message will be dumped.
12.19 Library Manager
This command category provides commands the Library Manager Editor, that is for
handling the libraries to be used in the project.liotheksverwalter, also für den Umgang
mit den im Projekt verwendeten Libraries.
12.19.1 Library Manager commands
The 'Library Manager Editor' plug-in provides in command category 'Library Manager'
the commands listed below for the Library Manager. By default, they are items of the
'Libraries' menu. If necessary open the Customize dialog to view resp. modify the menu
configuration.
• Add Library...
• Properties...
• Try to Reload Library
12.19.2 Add Library...
This command (category 'Library Manager') by default is part of the 'Libraries' menu
and the Library Manager editor window.
Activate the command if you want to include libraries via the currently opened Library
Manager into the project. Only libraries which are already installed on your system can
be added. Multiple versions of a library can be included in the project at the same time,
within one or multiple Library Managers.
The command opens the 'Add Library' dialog with its tabs 'Library' and 'Placeholder' .