Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 255)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 253
12.8.8 Move program
This command being part of menu item 'CNC’ opens the Translation vector dialog
where a vector can be defined by which the CNC program will be shifted. The values
for the following axes can be inserted: X, Y, Z, P, Q, U, V, W.
Abb. 87 Translation vector dialog
Before the first command of the following list (G1, G2, G3, G5, G6, G8, G9, G10, G11,
G92) is executed a relative G0 command with the coordinates of the translation vector
is inserted. If the first command is a G56 command, the translated program begins
with a G56 code, too. The sentence numbers are assigned automatically.
It is not possible to move a CNC program including variables or using the axis A, B or C.
IF the CNC program uses the shift coordinate commands (G54, G55, G56) the
arguments of the commands were adapted and the following sentences are not
changed.