Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 139)

L-force | PLC Designer
Quickstart

DMS 4.1 EN 03/2011 TD29 137
Start PLC Designer and create a project
(1) Start PLC Designer
From the Start menu on your PC choose
Programs > Lenze > PLC Designer > PLC DesignerV3.x
Alternatively you can start via the PLC Designer Icon which will be available on the
desktop after installation.
(Future: You will be asked to select a Profile and after pressing Continue the user
interface will open. )
The programming system will be automatically started with a predefined profile. So,
you do not to have to select a profile at the moment.
When you start the programming system the first time after first installation on the
system, you will be asked to choose the default collection of settings and features.
Abb. 36 Dialog 'Choose Default Environment Settings'
Choose "Standard" for the first steps described here, you always can switch to the
"Professional" settings (via the Project Options dialog) if necessary . In the "Standard"
environment the user interface is adapted for most effective usability and some rarely
used features are left out.