Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 890)

L-force | PLC Designer
Device Editors
888 DMS 4.1 EN 03/2011 TD29

To add an SDO entry to the configuration table, use button New...
The dialog Select item from object dictionary will open which - like for the mapping
configuration - offers the available object dictionary entries as defined in the EDS-file.
Abb. 490 Dialog Select item from object dictionary
In this case only the writable objects will be displayed (AccessType = *W*). Before
adding an SDO, you might modify its parameters by editing in the fields below the
objects table. So, by defining new index/subindex you optionally might add a new
object to the SDO, which is not described in the EDS-file.
The order (top-down) in the SDO table represents the sequence in which the SDOs will
be transferred to the module. By buttons Move Up and Move down the currently
selected entry can be shifted within the list.
The Value field can be edited. For this purpose select the field and press <space> or
perform another mouse-click.
You can define the behaviour in case of an error during SDO transfer by activating one
of the following settings :
Abort if error: If an error was detected, the transfer will be terminated with error state.