Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 181)

L-force | PLC Designer
Visualization

DMS 4.1 EN 03/2011 TD29 179
8.14 Target-Visualization
The code created for the visualization objects of the project can be downloaded to the
controller.
If it is supported by the target system and if an appropriate monitor is available, the
"Target-Visualization" can be started directly on the PLC computer. It is not necessary
that the programming system is running in order to run the visualization. This means a
considerable reduction of storage use.
Note: If the programming system is running, the visualization can additionally be
displayed there. However this is not equivalent to the pure "Diagnosis visualization"
mode.
The Target-Visualization will be started automatically on the controller when the
application is started there, if::
• a start visualization is defined (see Visualization Manager)
• the name of the application project on the controller is "<application>.app" (this
file is automatically created at a download of a visualization project)
• an appropriate runtime system ("with Target-Visu") is started
Note: The VISU_TASK, which automatically gets added to the Task Configuration
with the adding TargetVisualization or WebVisualization below the Visualization
Manager, will be removed when the last of these client objects was deleted or set to
"Exclude from build" in its property settings..
Settings concerning the start visualization and the display of a Target-Visualization are
handled by the Visualization Manager in sub-object TargetVisualization.
In case of small target systems consider the option to run the visualization integrated
in the programming system.