L-force | plc designer – Lenze PLC Designer PLC Designer (R3-1) User Manual
Page 628
Advertising
L-force | PLC Designer
General Editors
626
DMS 4.1 EN 03/2011 TD29
General
Abb. 333 CNC path in 3D mode
Ellipses, parables, and 2D-splines are not supported in 3D mode and an error message
is generated.
The SMC_CheckVelocities function block provided in SM3_CNC library checks the Z
component in different to the SMC_ToolCorr and SMC_AvoidLoop function blocks.
They generates errors. The Z component of the 3D elements defines the length or the
object and hence the interpolation time is affected.
Command G10
This command generates 3D cardinal splines.
Advertising