Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 472)

L-force | PLC Designer
Menu Commands sorted by Categories
470 DMS 4.1 EN 03/2011 TD29

12.25.2 Add a new recipe
Symbol:
This command (category 'Recipe commands') is used to add a new recipe to the
currently active recipe definition table. The dialog New Recipe will open where you
have to enter the recipe name as a string. If you want to copy the values or an existing
recipe, choose the desired one from the selection list.
Abb. 246 New Recipe dialog
Appropriately an additional column will be inserted in the recipe definition.
Note: A new recipe also might be created in online mode via an appropriately
configured visualization element (Input configuration, category 'Internal
command').
12.25.3 Remove recipes
Symbol:
This command (category 'Recipe commands') is used to remove an existing recipe from
the currently active recipe definition table.
Select one of the fields in the column describing the respective recipe and perform the
command. The column will be removed.
Note: A recipe also might be removed in online mode via an appropriately
configured visualization element (Input configuration, category 'Internal
command').