Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 320)

L-force | PLC Designer
Menu Commands sorted by Categories
318 DMS 4.1 EN 03/2011 TD29

Confirmation with OK will create the following standard project
The project contains a device as selected from the Device selection list, an Application
"Application", a Library Manager, a program POU "PLC_PRG" and a Task Configuration
with a task "MainTask" in the device tree. PLC_PRG will be set up in the programming
language selected from the selection list at PLC_PRG in:. The task will be a cyclic one,
calling PLC_PRG every 200 milliseconds. The newest version of the currently installed
library Standard.library will be included in the Library Manager.
Abb. 126 Example - Standard Project