Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 550)

L-force | PLC Designer
Menu Commands sorted by Categories
548 DMS 4.1 EN 03/2011 TD29

Transmit on event: The variables will be sent as soon as the specified Variable gets
TRUE.
Notice that the network variables will be automatically sent at each bootup. This
means that the actual variable values will be transmitted even if none of the other
defined transmission triggers (change or event) would force this at this moment.
Network Settings (for Global Network Variables List)
If the network functionality is supported by the current device, then the Network
Settings for a GNVL (Global Network Variable List) object can be viewed and edited in
the Properties dialog. Basically these are the settings which have been defined when
adding the NVL object via the 'Add Object' dialog. (Regard the general description on
how to use network variables).
Abb. 297 Properties dialog, Category Network Settings
Sender: Here you see either the name of the Global Variables List of the sending
device, which is referenced in the current NVL object, or "Import from file". If the name
is specified, the squared brackets include the name of the device and the application.
In case the Sender GVL is imported from a *.gvl file, which previously has been
exported from the respective Global Network Variables List, the complete file path is
shown here, for example: "D:\projects\pr9519\project_xy.gvl"
Task: Name of the task of the current device, which controls the data exchange of the
network variables.