L-force | plc designer – Lenze PLC Designer PLC Designer (R3-1) User Manual
Page 267
Advertising
L-force | PLC Designer
Menu Commands sorted by Categories
DMS 4.1 EN 03/2011 TD29
265
The command opens the Add Device dialog. Depending on the currently selected
position in the devices tree you will get a list of devices available for insertion. As a
precondition the devices, basing on a device description file, must be installed on your
system, which can be done by the Device Repository dialog.
Abb. 93
Add Device dialog
In the Name field at top of the dialog define a name with which the device should be
entered in the devices tree. This name must be a valid and unique IEC identifier.
Advertising