Lenze PLC Designer PLC Designer (R3-1) - Manual (Page 369)

L-force | PLC Designer
Menu Commands sorted by Categories

DMS 4.1 EN 03/2011 TD29 367
According to the available buttons see in the following descriptions on...:
• Library Repositories (Edit Locations...)
• Library Installation and Uninstallation (Install..., Uninstall...)
• Further information on the library (Details..., Dependencies...)
Library locations (Repositories)
Several repositories can be used to manage libraries. All currently defined repositories
are shown in the selection list behind Location:. By default in each case the "System"
location is available as defined by the »PLC Designer« installation.
To edit the repositories path or name use button Edit Locations... to open the Edit
Repository Locations dialog:
Abb. 170 Edit Repository Locations dialog
The currently defined locations are listed in the Repositories window. They will be
searched later for a library in the given order from up to down. To modify this order use
buttons Move up or Move down for moving the currently selected entry.
Notice that location "<all locations>" will display the libraries of all currently defined
locations. In this view no installation is possible.
Defining a new repository resp. modifying path and name of an existing repository:
To add a new repository, use the Add button. The Repository Locations dialog will open
where in the Location field you have to enter the path of the new repository. For this
purpose you might use button ... and browse for resp. define a new suitable folder.
Notice that the chosen folder must be empty! In the Name field enter a symbolic name
for the location for example "Libraries for System1".
To modify an existing repository, select the respective entry in the Edit Repository
dialog and use button Edit. Also the Repository Locations dialog will open where you
can edit the path and name for the repository.